Direct-Pure RO Lab Water System
Click to enlarge image(s)

The Direct-Pure RO lab water system produces reverse osmosis (RO) water from tap water directly.
- Electrical and water compartments are completely segregated, thus safer to operate. 
- The Fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life detection as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- User can set water dispensing time for easy water collection.
- The system is equipped with a 30-liter PE tank (upgradeable to a 60-liter) with a liquid level sensor. 
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.
Main Applications:
- Pure water can be used in many areas. Here are some typical applications.
- Manual cleaning and glassware rinsing
- Buffer preparation
- Glassware washers
- Humidifiers
- Water baths
- Aging tester
- Autoclave
- Laboratory animal feed
- Feed water for ultrapure water systems

 Feed Water Requirements  
 Tap water*  Municipal water, TDS < 1000 ppm (2000 μS/cm)
 Operating Temperature  5~45 ℃
 Feed Water Pressure  15 - 90 psi (1 - 6 bar)
 Product Water Flow Rate  10 or 20 L/h at 25℃
 RO Rejection Rate  
 Monovalent ions removal  >95%
 Polyvalent ions removal  >99%
 Bacteria and Particles removal  >99%
 Organics and Pyrogens removal  >99%
 Length x Depth x Height  30.3 cm × 51.2 cm × 48.2 cm
 Net Weight (Operating Weight)  18 - 21 kg

*If water hardness is greater than 1000 ppm, We suggests using an additional water softening device to protect the RO membrane in your system.

Copyright © egfie Herndon, VA